Settings
114
Water plus
You can increase the amount of water
delivered in the wash programmes.
Options
– Water plus (factory default setting)
More water is used in the wash and
rinse stages.
– Extra rinse
An additional rinse is carried out.
– Water plus and Extra rinse
The water level is increased in the
wash and rinse stages and an extra
rinse is carried out.
Water plus level
There are four different water levels
which can be selected with Water
plus.
Level
– Normal (factory default setting)
– Plus
– Plus
– Plus
Maximum rinse level
The water level in the rinse can be
permanently set to the highest value.
This function is important for allergy
sufferers as it achieves excellent rinse
results. The water consumption will be
increased.
Factory default setting: the maximum
rinse level setting is switched off.
Suds cooling
When this is activated, additional
water flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a
Cottons programme with a temperature
of 70°C or higher is selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
Factory default setting: Suds cooling is
switched off.
Содержание WTZH 730 WPM
Страница 121: ......
Страница 122: ......
Страница 124: ...M Nr 10 867 400 00 en AU NZ WTZH 730 WPM ...