
Problem solving guide
85
General problems with the washer-dryer
Problem
Possible cause and remedy
The washer-dryer is not
steady during a spin
cycle.
The machine feet are not level.
Level the machine and adjust the feet correctly.
Unusual pumping
noises.
This is not a fault. Slurping noises occur at the end of
the pump sequence as a normal part of operation.
Spinning sounds during
the drying process.
This is not a fault. The machine will spin even during
a drying programme (thermospin).
The laundry has not
been spun properly and
the laundry is still wet.
The machine detected an imbalance during the final
spin and reduced the spin speed automatically.
Include both large and small items in the load as
this will give better distribution.
Large amounts of
detergent residue
remain in the detergent
dispensing drawer.
The water pressure is too low.
Clean the filters in the water inlet.
It may be useful to select the
Water plus
option.
Powder detergent used in conjunction with water
softeners tends to become sticky.
Clean the detergent dispenser drawer and, in the
future, add washing powder to the dispensing
drawer first, and then add the water softener.
There is water next to
the capsule in the fabric
softener compartment.
The
Cap
sensor was not activated or an empty
capsule was not removed at the end of the last
programme.
Make sure that you remember to activate the
Cap
sensor the next time you insert a capsule.
Remove and dispose of the empty capsule at the
end of each programme.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
Clean the small pipe.
Содержание WTZH 730 WPM
Страница 121: ......
Страница 122: ......
Страница 124: ...M Nr 10 867 400 00 en AU NZ WTZH 730 WPM ...