Miele WTZH 730 WPM, Руководство по эксплуатации

Страница: 109 / 124

Settings
109
Language

The display can be set to appear in
one of several different languages.
The flag

after the word Language
(Sprache in German) acts as a guide in
case a language which is not
understood has been set.
The language selected is saved.
TwinDos
You can set the type and amount of
detergent and also start a cleaning
programme for the TwinDos system.
Detergent/amount
The washer-dryer is pre-set as standard
for UltraPhase 1 and UltraPhase 2 for
hardness range I (

).
The settings must be changed in the
electronics:
– for water hardness range II (  ) and
water hardness range III (  ).
– when changing to a different
detergent or fabric softener. TwinDos
containers (optional accessories) are
required for this.
Please refer to the UltraPhase
cartridges for correct dosage amounts
for each water hardness range.
Adjusting the dosage amount
Deterg. type/amount

 Touch the OK sensor.
Compartment 

 Touch the OK sensor.
  Miele UltraPhase 1

Touch the OK sensor.
Dosage -  ml 48

Use the

and

sensors to adjust
the dosage amount as required and
confirm this value with the
OK sensor.

Set the dosage for UltraPhase 2
 Confirm the message with the
OK sensor.
Dosage -  ml 36

Use the

and

sensors to adjust
the dosage amount as required and
confirm this value with the
OK sensor.
The dosage amount has been adjusted.