Miele WTZH 730 WPM, Руководство по эксплуатации, Страница: 115 / 124

Settings
115
Low water pressure
If the water pressure is below 100 kPa
the washer-dryer will stop the
programme and the error message
Water intake fault
will appear in the
display.
If the on-site water pressure cannot be
increased and the water pressure is
constantly low (below 100 kPa),
activating this setting will prevent the
programme from being cancelled.
Factory default setting: Low water
pressure is switched off.
Laundry ring prevention
The maximum final spin speed can be
limited to prevent laundry forming a
ring around the drum. This setting is
only effective when washing and
drying in a continuous sequence.
Options
– 1200 rpm (factory default setting)
– 1100 rpm
– 1000 rpm
– 900 rpm
Drying levels
You can adjust the drying levels in the
Cottons , Minimum iron and Automatic
programmes.
The drying level is shown in a bar chart:
– Less bars = damper
– More bars = drier
Extended cool down
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
The cooling down phase can be
lengthened from 0 min to 18 minutes.
The programme duration will increase
accordingly.