Warning and Safety instructions
10
The Miele water protection system protects from water damage
provided the following conditions are met:
– The machine is correctly plumbed in and connected to the
electricity supply.
– If a fault or damage has been identified, the washer-dryer must be
repaired by a competent person before further use.
The water flow pressure must be at least 100 kPa and must not
exceed 1000 kPa.
The machine must only be connected to the on-site water supply
using a new hose kit. Old hose kits must not be re-used. Check the
condition of the hoses regularly so that you can replace them in
good time and avoid the risk of any water damage.
Faulty components must only be replaced by Miele original spare
parts. Miele can only guarantee the safety standards of the appliance
when Miele replacement parts are used.
If the connection cable is faulty, it must only be replaced by a
Miele authorised service technician to protect the user from danger.
This washer-dryer must not be operated in mobile installations
(e.g. on a ship).
Do not make any alterations to the washer-dryer, unless
authorised to do so by Miele.
Reliable and safe operation of this washer-dryer can only be
assured if it has been connected to the mains electricity supply.
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the machine warranty.
Содержание WTZH 730 WPM
Страница 121: ......
Страница 122: ......
Страница 124: ...M Nr 10 867 400 00 en AU NZ WTZH 730 WPM ...