Problem solving guide
80
Fault messages after a programme has been cancelled
Problem
Possible cause and remedy
Water intake See
The water inlet is blocked or restricted.
Check whether the tap is turned on properly.
Check whether the inlet hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
Clean the filter.
Check drainage See
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the drain filter and the drain pump.
Check whether the maximum delivery height of
1 m has been exceeded.
Service
Waterproof syst.
The water protection system has reacted.
Turn off the tap.
Call Miele.
Service Fault F
There is a fault.
Restart the programme.
If the fault message appears again, contact Miele.
To switch off the fault message, switch the washer-dryer off with the
button.
Содержание WTZH 730 WPM
Страница 121: ......
Страница 122: ......
Страница 124: ...M Nr 10 867 400 00 en AU NZ WTZH 730 WPM ...