manualshive.com logo in svg

Miele KM 7720 FR, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 7720 FR Скачать руководство пользователя страница 8

IMPORTANT SAFETY INSTRUCTIONS

8

 

The appliance must be completely disconnected from the electric-

ity supply during installation, maintenance and repair work. Ensure
that power is not supplied to the appliance until after it has been in-
stalled or until any maintenance or repair work has been carried out.
Disconnect by

- removing the fuse,

- “tripping” the circuit breaker, or

- unplugging the unit (if equipped with plug). Pull the plug not the

cord.

 

Danger of electric shock. Do not use the cooktop if it is faulty, or if

the ceramic surface is cracked, chipped, or damaged in any way.
Switch it off immediately. Disconnect the cooktop from the electrical
power supply. Contact Miele Service.

 

If the cooktop is installed behind a cabinet door, do not close the

door while the cooktop is in operation. Heat and moisture can build
up behind the closed door and cause damage to the cooktop, cabi-
netry, and flooring. Do not close the door until the residual heat indi-
cators go out.

Содержание KM 7720 FR

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды