manualshive.com logo in svg

Miele KM 7720 FR, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 7720 FR Скачать руководство пользователя страница 4

IMPORTANT SAFETY INSTRUCTIONS

4

This cooktop complies with all relevant local and national safety
requirements. Inappropriate use can, however, lead to personal in-
jury and material damage.

Read the operating and installation instructions carefully before
using the cooktop. They contain important information on safety,
installation, use and maintenance. This prevents both personal in-
jury and damage to the cooktop.

When installing the cooktop, Miele expressly and strongly advises
that you read and follow the instructions under “Installation”, as
well as in the “IMPORTANT SAFETY INSTRUCTIONS”.

Miele cannot be held liable for injury or damage caused by non-
compliance with these instructions.

Keep these instructions in a safe place and pass them on to any
future owner.

Appropriate use

 

This cooktop is intended for domestic use and use in other similar

environments.

 

This cooktop is not intended for outdoor use.

 

The cooktop is intended for domestic use only to prepare food

and keep it warm. Any other use may be dangerous.

 

Persons (including children) who lack physical, sensory or mental

abilities, or experience with the appliance should not use it without
supervision or instruction by a responsible person.

Содержание KM 7720 FR

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды