manualshive.com logo in svg

Miele KM 7720 FR, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 7720 FR Скачать руководство пользователя страница 44

Timer

44

The cooktop has to be switched on if
you wish to use the timer.

The timer can be used for the following
2 functions:

- setting the kitchen timer

-

reduce automatically to power 

level 1

You can use the functions simultane-
ously.

A duration of between 1 minute (

:

)

and 9 hours 59 minutes (

:

) can be

set.

Durations of up to 59 minutes are
shown in minutes (00:59) and durations
of more than 60 minutes are shown in
hours and minutes. Durations are en-
tered in the order of hours, followed by
minutes in tens and then units.

Example:

59 minutes = 00:59 hours,
Enter: 5–9
80 minutes = 1:20 hours,
Enter: 1–2–0

After the first number has been entered,
the timer display will light up constantly.
After the second number has been en-
tered, the first number will move to the
left. After the third number has been en-
tered, the first and second numbers will
move to the left.

Kitchen timer

The timer is set using the numerical dis-
play for the left or front left cooking
zone (depending on model).

Setting the timer

Touch the 

 sensor control.

The timer display flashes.

Set the required time.

Touch the 

 sensor control or wait

10 seconds to start the timer.

Changing the timer duration

Touch the 

 sensor control.

The timer display flashes.

Set the required time.

Deleting the timer

Touch the 

 sensor control.

Touch 

 on the numerical display.

Содержание KM 7720 FR

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды