Miele KM 7720 FR Скачать руководство пользователя страница 58

Страница: 58 / 80

Frequently Asked Questions

With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.

This guide may help you to find the reason for the fault, and how to correct it.

Messages in the display

Problem

Possible cause and solution



will flash alternately

with



in the timer dis-

play and a tone will
sound.

The cooktop is incorrectly connected.



Disconnect the cooktop from the electrical power
supply.



Contact Customer Service. The cooktop must be
connected to the power supply according to the
wiring diagram.

After the cooktop has
been switched on, or af-
ter touching a sensor
control,



appears in

the timer display for a
few seconds.

The system lock or safety lock is activated.



Deactivate the system lock or safety lock (see
“Safety features – System lock/Safety lock”).

After the cooktop has
been switched on,



appears briefly in the

timer display. The cook-
ing zones do not heat
up.

The cooktop is in demo mode.



Touch the 0 sensor control on any of the numerical
displays.



Then touch the



and



sensor controls at the

same time until



flashes alternately with



the timer display.

The cooktop has
switched off automati-
cally. When the element
is switched back on,



appears above the



On/Off sensor control.

One or more of the sensor controls are covered, e.g.,
by finger contact, food boiling over, or an object.



Clean off any soiling and/or remove the object (see
“Safety features – Safety shut-off”).



will flash alternately

with



in the timer

display.

Overheating protection has been triggered.



See “Safety features – Overheating protection”.

Содержание KM 7720 FR

















































































Результаты поиска

Содержание KM 7720 FR

Отзывы:

Бренды по названию

Популярные бренды

Miele KM 7720 FR, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KM 7720 FR

Отзывы:

Бренды по названию

Популярные бренды