Miele KM 7720 FR Скачать руководство пользователя страница 60

Страница: 60 / 80

Frequently Asked Questions

Unexpected behavior

Problem

Possible cause and solution

The power level se-
lected is flashing.

There is no dishware on the cooking zone, or the
dishware is unsuitable.



Use suitable cookware (see “Induction – Cook-
ware”).

Power level 9 is auto-
matically reduced if you
also set power level 9
for the connected cook-
ing zone.

Operating both zones at power level 9 exceeds the
permitted maximum power for the two zones.



Use a different cooking zone.

A cooking zone turns it-
self off automatically.

It might have been turned on for too long.



You can use the cooking zone again by turning it
back on (see “Safety features – Safety shut-off”).

The cooking zone is not
working in the usual
way with the set power
level.

Overheating protection has been triggered.



See “Safety features – Overheating protection”.

A cooking zone or the
whole cooktop switches
off automatically.

Overheating protection has been triggered.



See “Safety features – Overheating protection”.

The booster has auto-
matically turned off
early.

Overheating protection has been triggered.



See “Safety features – Overheating protection”.

Содержание KM 7720 FR

















































































Результаты поиска

Содержание KM 7720 FR

Отзывы:

Бренды по названию

Популярные бренды

Miele KM 7720 FR, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KM 7720 FR

Отзывы:

Бренды по названию

Популярные бренды