manualshive.com logo in svg

Miele KM 7720 FR, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 7720 FR Скачать руководство пользователя страница 47

Additional functions

47

Stop & Go

When Stop & Go is activated, the power
level of all cooking zones in use is re-
duced to power level 1.
The cooking zone power levels and the
timer settings cannot be altered; the
cooktop can only be switched off. The
kitchen timer, shut-off, Booster, and
heat-up times continue to run.
When Stop & Go is deactivated, the
cooking zones will operate at the power
level previously selected.

If the function is not deactivated within
1 hour, the cooktop will switch off.

Activation/deactivation

Touch the 

 sensor control.

Use this function if there is a danger of
food boiling over.

Wipe protection

The cooktop sensor controls can be
locked for 20 seconds, e.g., to remove
soiling. The 

 sensor control is not

locked.

Activating

Touch the 

 sensor control.

The time counts down in the timer dis-
play.

Deactivating

Touch the 

 sensor control until the

timer display goes out.

Demo mode

This function enables the cooktop to be
demonstrated in dealer showrooms
without heating up.

Activation/deactivation

Switch the cooktop on.

Touch the 0 sensor control on any of
the numerical displays.

Then touch the 0 and 2 sensor con-
trols at the same time for 6 seconds.

In the timer display, 



 flashes alter-

nately with 



 (demo mode activated)

or 



 (demo mode deactivated) for a

few seconds.

Содержание KM 7720 FR

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды