manualshive.com logo in svg

Miele KM 7720 FR, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 7720 FR Скачать руководство пользователя страница 35

Cookware

35

Tips

- To make optimum use of the cooking

zones, choose cookware with a suit-
able base diameter (see “Overview –
Cooking zone data”). If the cookware
is too small it will not be recognized.

- Position the cookware as centrally as

possible on the relevant cooking
zone/cooking area.

- Use only pots and pans with smooth

bases. Rough bases can scratch the
ceramic glass.

- Always lift the cookware to move it.

This will help prevent scratching. If
any scratches do appear as a result
of cookware being pushed around,
this will not affect the function of the
cooktop. These scratches are normal
signs of use and are not grounds for
making a complaint.

- Please note that the pot or pan diam-

eter quoted by manufacturers often
refers to the maximum diameter or
diameter of the top rim. The diameter
of the base (generally smaller) is more
important.

- If possible, use pans with straight

sides. If pans with sloped sides are
used, the induction also takes effect
around the edges of the pan. This
can cause the edge of the pan to be-
come discolored or the coating to
peel off.

Содержание KM 7720 FR

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды