manualshive.com logo in svg

Miele KM 7720 FR, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 7720 FR Скачать руководство пользователя страница 52

Programming

52

You can adapt the programming of the
cooktop to your personal needs. Sev-
eral settings can be changed in succes-
sion.

After accessing programming mode,
the 

 symbol appears and 



 will ap-

pear in the timer display. After a few
seconds 

:

 (Program 01) will flash al-

ternately with 

:

 (Code) in the timer

display.

Changing the programming

Accessing programming mode

The 

 sensor control is located ap-

prox. 1 cm (index finger width) to the
left of the 

 sensor control.

With the cooktop turned off

, touch

and hold the 

 and 

 sensor con-

trols together until the 

 symbol

lights up and 



 appears in the timer

display.

Setting the program

For a two-digit program number you
first need to set the tens position.

While the program is visible in the
display (e.g., 

:

), touch the 

 sen-

sor control repeatedly until the num-
ber for the program you want appears
in the display or touch the appropri-
ate number on the numerical display.

Setting the code

While the code is visible in the display
(e.g., 

:

), touch the 

 sensor con-

trol repeatedly until the number for
the code you want appears in the dis-
play or touch the appropriate number
on the numerical display.

Saving the settings

While the program is visible in the
display (e.g., 

:

), touch the 

 sen-

sor control until the indicators go out.

To avoid saving the settings

While the code is showing in the dis-
play (e.g., 

:

), touch the 

 sensor

control until the indicators go out.

Содержание KM 7720 FR

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды