manualshive.com logo in svg

Miele KM 7720 FR, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 7720 FR Скачать руководство пользователя страница 76

Declaration of conformity

76

Supplier's Declaration of Con-
formity 47 CFR § 2.1077 Com-
pliance Information

Induction Cooktop

Unique Identifier:

 Miele Model:

KM7720; KM7730; KM7740

Responsible Party

Miele, Inc.
National Headquarters
9 Independence Way
Princeton, NJ 08540
Phone: 800-843-7232
Fax: 609-419-4298
www.mieleusa.com

FCC Compliance Statement:

 This de-

vice complies with Part 18 of the FCC
Rules.

IC Compliance Statement:

 This device

complies with

CAN ICES-001 (B) / NMB-001 (B)

Radio Modules

This device contains the following WiFi
module:

FCC ID

2ACUWEK037

IC ID

5669C-EK37

Frequency band

2.412 GHz –
2.462 GHz

Maximum trans-
mitting power

< 0.1 W

Compliance Statement

This device complies with Part 15 of the
FCC Rules and contains licence-ex-
empt transmitter(s)/receiver(s) that com-
ply with Innovation, Science and Eco-
nomic Development Canada’s licence-
exempt RSS Standard(s). 
Operation is subject to the following
two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interfer-
ence received, including interference
that may cause undesired operation.

The construction of the device assures
that the FCC/IC exposure limits are ver-
ifiably met using the integrated radio
module.

Warning!

Any changes or modifications to this
unit not expressly approved by the
party responsible for compliance
could void the user’s authority to op-
erate the equipment.

Содержание KM 7720 FR

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды