Problem
Possible cause and remedy
When the oven is
switched on "System
lock
0
" appears in the
display.
The system lock
0
is active.
It can be released for a programme to be run by
touching the
0
symbol for at least 6 seconds.
The system lock can be permanently deactivated (see
"Settings – System lock
0
").
The oven does not heat
up.
^
Check whether "On" has been selected for demo
mode (see "Settings - Showroom programme").
If demo mode has been switched on the oven can be
operated but it will not heat up.
^
Deactivate demo mode.
"Power cut - Process
cancelled" appears in
the display.
There has been a power cut which has caused a
current process to stop.
^
Switch the oven off and then back on again.
Start the cooking programme again.
12:00 appears in the
display.
The power supply was interrupted for longer than 200
hours.
^
Reset the time and date.
The message
"Maximum operating
duration reached"
appears unexpectedly
in the display.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^
Select "OK". Touch
#
to delete "Process finished".
The oven will then be ready for use again.
"
;
Fault XX" appears in
the display.
There is a problem that you cannot resolve.
^
Call the Miele Service Department.
Problem solving guide
130
Содержание H6800BM
