Miele H 4080 BM, Техническая информация

Страница: 26 / 84

Technical Information
26
H 408x BM
1 Technical Data
Cooling fan (M2/1)
Voltage 120VAC, 60Hz
Output 51/17 W
Speed
normal 2700 rpm
fan cooldown 1200 rpm
Switching temperature 149°F (65°C)
Magnetron (G2)
Microwave output at 240V (partial output
through pulsing) 1000W, 850W, 600W, 450W, 300W,
150W, 80W
Microwave frequency 2450MHz
Magnetron thermostat (F1/2)
Cutoff temperature 275°F (135°C)
High-voltage capacitor (A4)
Voltage 2100V
Capacitance 0.97µF
High-voltage transformer (T1)
Voltage (output) 2250V (approximate)
Table 012-1:
Technical Data
2 Function
2.1 Air and Vapor Ducting
1.
Cool air intake:
The fan (Figure 012-1, Item 1) draws in cool air through the openings.
The incoming air cools the appliance, the electrical components and the
surrounding cabinet on all sides.
2.
Cool air and vapor path:
The fan moves the cool air to the rear of the air duct (Figure 012-1, Item 2).
The air cools the magnetron and is then moved through the front of the air
duct (Figure 012-1, Item 3) where it exits the appliance.
Since machine no. 10/59114004, the multi-piece metal ducting has been
replaced with a single plastic duct.
a.
Air path during Microwave Solo cycle:
The release element (Figure
012-1, Item 4) opens the air baffle (Figure 012-1, Item 5), permitting a
small amount of cool air to enter the oven cavity, where it mixes with
vapor. The air/vapor mix then moves through the vapor passage
(Figure 012-1, Item 6) to the vent (Figure 012-1, Item 7) where it again
mixes with cool air. If the air baffle does not open, air cannot exit and