Microtronics myDatalogEASYplus, Руководство пользователя

Страница: 92 / 139

Note:
Example to explain the filter time in conjunction with the ext. warmup time
Basic setting Record interval 5min.
Measurement cycle 1min.
Output channels Ext warmup time 1sec.
Measurement channels -
>Config. Filter time 500ms
Output on the device Sensor supply
Explanation: The sensor supply is always activated 1 sec before expiry of the measurement cycle. The filter time
starts 500ms before expiry of the measurement cycle, which ensures that a valid value is available at the time of a
measurement. However, this also means that the filter time must be taken into consideration when selecting the
ext warmup time. In the current example, the sensor connected to the input must at the latest supply stable values
500ms following activation of the sensor supply. Otherwise, invalid values would be taken into consideration while
averaging during the filter time resulting in the measurement value being distorted.
9.2.1.5.2 Config
Off ---
Ext warmup time ---
Digital ---
Freq ---
PWM ---
Pulse Duration Duration of an output pulse [ms]
92 Rev. 06