Microtronics myDatalogEASYplus, Руководство пользователя

Страница: 73 / 139

Chapter 9 User interfaces
Universal inputs
(PWM mode 1/2)
PWM
(1/2)
Filter time Time in [ms] during which the signal must remain
constant to initiate a level change. Used to suppress
brief faults (debouncing).
Decay Temporal function in the measurement cycle
off
Decay deactivated
min The minimum of the last x measurement
values is recorded.
max The maximum of the last x measurement
values is recorded.
avg The arithmetic mean of the last x
measurement values is recorded.
med The median of the last x measurement
values is recorded.
rms The root mean square of the last x
measurement values is recorded.
Time Decay period. Up to a maximum of 60 measurement
valuescan be used for the calculation (e.g. 1 channel:
60 measurement values; ... 4 channels:
15 measurement values each). To calculate the number
of measurement values that are taken into account,
refer to "Example to clarify the record interval,
measurement cycle and burst interval in conjunction
with the decay" in chapter "Basic settings" on page
96.
Hold Hold the last valid measurement value for x
measurement cycles
off
Function deactivated
1-5 Number of measurement cycles for which
the measurement value is held until the
error value is issued
on In the event of an error, the last valid
measurement value is held until a new
valid measurement value is present.
Rev. 06 73