Microtronics myDatalogEASYplus, Руководство пользователя

Страница: 100 / 139

Firmware type Released Only firmware versions that have successfully undergone
internal and field testing are installed (this practically
eliminates malfunctions).
Release candidate Only firmware versions that have successfully undergone
internal testing are installed (malfunctions cannot be
excluded).
Beta release Even firmware versions that have not successfully
undergone all of the internal tests are installed
(malfunctions may occur).
Hardware
version Reserved for extensions
9.2.2.3 Device-specific settings
Operating
mode hold Measurement: OFF, transmission: ON
run Measurement: ON, transmission: ON
transport Measurement: OFF, transmission: OFF
offline Measurement: ON, transmission: OFF
Accu type Charging rule for the rechargeable battery pack used (temp...charging conditions,
V
low
... charge level)
Battery Charge controller deactivated
Li-ion Temp.:0°C to +45°C, V
low
:3,7V
NiMH Temp.:-10°C to +60°C, V
low
:3,9V
Solar Temp.:0°C to +45°C, always charging
AP404D Temp.:0°C to +45°C, V
low
:3,7V
AP404D solar Temp.:0°C to +45°C, always charging
AP413D
Temp.:0°C to +45°C, V
low
:3,7V
AP413D solar Temp.:0°C to +45°C, always charging
Temp.:-30°C to +60°C, V
low
:3,7V
solar Temp.:-30°C to +60°C, always charging
Temp.:-30°C to +60°C, V
low
:3,7V
solar Temp.:-30°C to +60°C, always charging
AP403D
Temp.:-40°C to +80°C, V
low
:3,7V
AP403D solar Temp.:-40°C to +80°C, always charging
LiPo backup
Temp.:0°C to +45°C, V
low
:3,7V
BP434R Charge controller deactivated
100 Rev. 06