Revision History
UG0617 User Guide Revision 4.0
1
1
Revision History
The revision history describes the changes that were implemented in the document. The changes are
listed by revision, starting with the most current publication.
1.1
Revision 4.0
The following is a summary of the changes made in revision 4.0 of this document.
•
Information about the jumper settings required for programming the device using FlashPro4 was
updated. For more information, see
Power Supply and Programming,
page 43.
1.2
Revision 3.0
The following is a summary of the changes made in revision 3.0 of this document.
•
The procedure for measuring 1.2 V current sensing during normal operation was updated. For more
information, see
1.2 V Current Sensing for Normal Operation,
page 11 (SAR 75660).
1.3
Revision 2.0
The following is a summary of the changes made in revision 2.0 of this document.
•
The J34 and J12 FMC connector pinouts were updated. For more information, see
Table 15,
page 25 and
Table 16,
page 31 (SAR 75871).
•
The SerDes loopback test procedure was updated. For more information, see
SerDes Loopback
Test,
page 43 (SAR 73557).
•
The specifications for the Marvell PHY were updated. For more information, see
Marvell PHY
(88E1340S),
page 18 (SAR 74316).
•
The clock oscillator specifications were updated. For more information, see
Clock Oscillator,
page 21 (SAR 77521).
•
The kit contents were updated. For more information, see
Kit Contents,
page 2 (SAR 79281).
•
The RTG4 Development Kit Block Diagram was updated. For more information, see
Figure 1,
page 3 (SAR 80330).
1.4
Revision 1.0
Revision 1.0 was the first publication of this document.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from