Manufacturing Test
UG0617 User Guide Revision 4.0
44
•
Short J23 (VPP power jumper) to pin 1-2
2.
Connect one end of the USB cable (mini USB to Type A USB cable) to J47 and the other end of the
cable to the USB port of the host PC.
3.
Open the FlashPro v11.5 software.
Figure 22 •
FlashPro Window
4.
Click
New Project
to create a new project, as shown in the following figure.
•
Enter the
Project Name
.
•
Select
Single device
as the Programming mode, then click
OK
.
Figure 23 •
Creating a New Project
5.
Click
Configure Device
.
•
Click
Browse
, and select the
RTG4 DEV KIT MTD.stp
file from the
Load Programming File
window.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from