Microplex LOGIJET T4, Руководство оператора

Страница: 22 / 117

22 Handling of Consumables
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID T4 / T5 / T6 / T8 Edition 2.0
guide disc
unwinder
Fig. 4.2.1.b Pulling off the outer guide disc
4. The material roll should turn in an anti-clockwise direction
when unwinding. Take the Tear-off roll-fed media and hold
it in the corresponding way.
5. Push the material onto the unwinder with the appropriate
adapter rings.
6. Push on the outer guide disc of the unwinder.
7. Lay the material around the bouncer arm (compare item 25
in chapter 4.1 Winding Diagram).
8. Set the material guide to the width of the label material. To
do this loosen the thumb screw on the underside of the front
material guide (3). Push the material guide to the side (if
necessary). Tighten the thumb screw again.