Microplex LOGIJET T4, Руководство оператора

Страница: 76 / 117

76 Panel Functions
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID T4 / T5 / T6 / T8 Edition 2.0
6.25. Setting the Zero Position of the Material Feed (Sync Sensor Offset)
Using this function an offset from the detected paper feed
zero-position (gap position) can be set in millimeter units.
By this the position of the printout and cut is adjusted relatively to the
gap / perforation of the material.
Setting range: -15 to +240 mm.
feed direction
print m aterial
G ap position
detected by
the printer,
zero-position
ON LINE
↵
PROG ESC
FEED
Ù
ON LINE
↵
FEED
Ù
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
Ÿ Ÿ Ÿ
[Engine ]
[Paper Move ]
Ÿ Ÿ Ÿ
Notes
Turn the printer OFF LINE with this
key.
The PROG ESC key gives the user
access to the menu structure.
Press the FEED
s
or CUT
t
key until
[Engine ] is displayed.
Press the FEED
s
or CUT
t
key until
[Sync.Sens.Offset ] is displayed.
The instructions are continued on the following page.