Microplex LOGIJET T4, Руководство оператора

Страница: 23 / 117

Handling of Consumables 23
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID T4 / T5 / T6 / T8 Edition 2.0
material guide
Fig. 4.2.1.c Setting the material guide
9. Press the red load lever (4) of the infeed to raise the contact
rollers. Keeping the load lever (4) pressed down, push the
beginning of the material through the material guide until it
is underneath the printhead.
load lever
Fig. 4.2.1.d Inserting the material
10. Arrange the material so that it is drawn in straight.
Position the contact rollers of the print unit, while pressing
down the load lever, so that both rollers (5) sit
symmetrically on the material.
(Notice: in figure 4.2.1.e the printhead has been removed
to provide a clearer view)
Pay attention to the following safety instructions!