Microplex LOGIJET T4, Руководство оператора

Страница: 26 / 117

26 Handling of Consumables
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID T4 / T5 / T6 / T8 Edition 2.0
4.3. Handling of Ribbon (Foil)
4.3.1. Ribbon Loading
If you want to operate the printer in the thermal transfer mode a
printer ribbon has to be used (compare chapter 1.1).
F
Make sure you always use a printer ribbon being wider than the
media to print on. In the case of printing on abrasive media
printhead damaging can be avoided this way.
To set the ribbon go on like this:
1. Open the printer hood.
2. Switch off the printer.
3. The ribbon unwinding should be performed counter-clockwise.
Take the ribbon and slip it onto the ribbon mandrel (1) in
the corresponding way until it stops.
4. Remove the protection foil if necessary (by unwinding it and
cutting it off).
ribbon mandrel
material contact
roller
left mandrel
Fig. 4.3.1.a Feeding through the ribbon below the printhead