Panel Functions
87
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
6.32. Configuration of Network Parameters (f.e. IP Address)
The functions of the submenu Network are used to set the
parameters for connecting the printer to a network (Ethernet).
Setting the IP address manually:
ON LINE
↵
PROG ESC
FEED
Ù
ON LINE
↵
FEED
Ù
ON LINE
↵
ON LINE
↵
FEED
Ù
ON LINE
↵
ON LINE
↵
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
[Network ]
[Off ]
[Manual ]
[IP Address ]
[192.168.002.002
]
[192.168.010.123
]
[192.168.010.123
]
Notes
Turn the printer OFF LINE with this
key.
The PROG ESC key gives the user
access to the menu structure.
Press the FEED
s
or CUT
t
key until
[Network ] is displayed.
The currently set configuration is
displayed.
Press the FEED
s
or CUT
t
key until
[Manual ] is displayed.
Press the ON LINE
↵
key to set the IP
address manually.
Pushing the FEED
s
key changes the
value of the current position (left digit
first, in this example: 1). Pushing the
CUT
t
key moves you to the next
position.
The new IP address is stored.
Turn the printer ON LINE again:
Press the ON LINE
↵
key longer than
2 seconds.
Содержание LOGIJET T4
Страница 108: ......
