Microplex LOGIJET T4, Руководство оператора

Страница: 5 / 117

Contents 5
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID T4 / T5 / T6 / T8 Edition 2.0
Chapter Page
6.21. Symbol Code Selection 72
6.22. Paper Change and manual Material Transport (Paper Move) 73
6.23. Print Speed Adjustment 74
6.24. Contrast (Density) Setting 75
6.25. Setting the Zero Position of the Material Feed (Sync Sensor Offset) 76
6.26. Setting the Sync Sensor Mode 78
6.27. Setting the Sync Sensor Level 79
6.28. Setting the Sync Sensor Sensitivity 80
6.29. Selecting the Light Sensor Type 81
6.30. Selecting the Cut Mode 82
6.31. Adjusting the Cutting Position 86
6.32. Configuration of Network Parameters (f.e. IP Address) 87
7. Operator Maintenance 89
7.1. Printer Cleaning 89
7.1.1. Printer Cabinet Cleaning 90
7.1.2. Printhead Cleaning 91
7.1.3. Sensor Cleaning 92
7.1.4. Transport Roller Cleaning 92
7.2. Printhead Exchange 93
7.2.1. Printhead Removal and Installation 94
7.2.2. Head Resistance Value Setting 97
7.3. Adjusting the Right Pressure Value 100
8. Troubleshooting 102
8.1. Error Messages 102
8.2. Reduced Print Quality 103
8.3. Incorrect Media Transport 105
8.4. Print Repetition after an Error 106
9. Specifications 107
10. Index 111