manualshive.com logo in svg

MICRO-EPSILON ODC 2600-40, Руководство по эксплуатации

Поделиться
Скачать
MICRO-EPSILON ODC 2600-40 Скачать руководство пользователя страница 59

Page 59

Measure

optoCONTROL 2600

6.8.3 

Contamination

Dust deposits in the measurement channel (receiver and light source), particularly on 
the target, should be avoided. Where possible, the horizontal measurement arrangement 
should be preferred.

 

> Measurement error or edge error

i

  Use a clean soft, lint-free cloth or lens cleaning paper and pure alcohol (isopropa-

nol) for cleaning the protective window! 
Do not use commercial glass cleaner or cleansing agents!

  Subject to clean compressed air using a normal commercial nozzle the receiver and 

the laser continuously in dusty ambient conditions (free of dust and oil).

6.8.4 

Transparent Target Objects

i

  With application on transparent materials (e.g. edges of clear films and plates or 

transparent round material - glass tubes), MICRO-EPSILON Eltrotec GmbH recom-
mends that tests are first carried out. 

  Use the menu 

Video

, see A 5.3

It is likely that transparent target objects (e.g. glass rods or tubes) shade the light beam 
at the outer edges, but allow it to pass to the receiver on the inside. Therefore, the video 
signal image on the display should be observed. For transparent target objects the 
program 

Diameter (DIA)

 should be preferably selected, because in this case the first 

and last edges are used for the measurement of the distance.
Diffusely transparent material can be measured

, see 3.12

.

NOTICE

Содержание ODC 2600-40



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды