NetRunner WAN User’s Manual
Startup
3-8
Channel Syntax Information
Channel Number
Channel numbers are assigned to
all
the ports on the
Syntax
local unit. The CCM module is always module location
A and it has six (6) connectors (except the NetRunner
75E which has four). From left to right these are num
bered sequentially (16). The channel numbers corre
spond to the module and connector locations (ports).
The same is true for all the other modules except the
LAN Module which has no individual ports. The first
connector, regardless of the type, on the left side is con
nector number 1. If this connector is on the module in
location B, the channel number is B1. If the connector is
on module C, the channel number is C1, and so forth.
MICOM Mux
MICOM mux ports are numbered 1 up to 32
Channel Syntax
sequentially.
Node ID/
Node ID, a slash, and the channel number. The slash, a
Channel # Syntax
separator (delimiter) between the node ID and channel,
must
be there. (Examples: NEW_YORK/A5 is port 5 of
module A on the new_york node. DALLAS/10 is port 10
on the dallas MICOMmux node.)
Range of
You may access more than one port on the same node.
Channels Syntax
To access a specified range of channels (C4D8) on the
unit identified by the ID of
NODE_A
, you would type the
following:
NODE_A/C4-D8
Note:
In all cases, the input syntax is not case sensitive.
