Micom NetRunner Скачать руководство пользователя страница 112

Страница: 112 / 237

Data Channels and Switching Configuration

NetRunner W

AN User’s Manual

5-22

Force Connections

The procedures for force connecting async and sync channels are the same.

The two ports to be connected must be the same type of port (i.e., async to

async, sync to sync, etc.). If a port is force connected, no other channel may

access it through switching calls.

Do not force connect a LAN module.

Force Connect Procedure

To make a force connection, follow this path through the menus.

SWITCHING CONTROL

FORCE CONNECT

COMMAND FACILITY MAIN MENU

SWITCHING CONTROL

Enter the channel # that is local to
the Command Facility.

ENTER FROM NODE/CHANNEL # (OR RANGE OF CHANNELS) (^X TO ABORT):

SIMI/A4

Note:

If force connecting DLCIs, be sure to include the DLCI number following the
port. For example: SIMI/A4.2132

You must be in the Command Facility of the node from which the force

connect is going to be made. Otherwise an

Illegal Input

message will be

displayed.

ENTER TO NODE/CHANNEL # (^X TO ABORT):

SAC/A4

Enter the

o channel (or

channel and DLCI).

When successfully connected, the Switching Control menu is redisplayed.

Notes:

If you force connect a channel already force connected, the new connection
overrides the old connection.

Do not force connect ports that you know are inoperative or not in use. It
may have an effect on the bandwidth use.

If you force connect voice/fax ports, the bandwidth setting (voice activated,
continuous, or dynamic) and the digitizing rate must match at each end of
the channel.

Содержание NetRunner














































































































































































































































Результаты поиска

Содержание NetRunner

Отзывы:

Похожие инструкции для NetRunner

Бренды по названию

Популярные бренды

Micom NetRunner, Руководство пользователя

Результаты поиска

Содержание NetRunner

Отзывы:

Похожие инструкции для NetRunner

Бренды по названию

Популярные бренды