Michco sc8000, Руководство по обслуживанию

Страница: 24 / 225

PM Check List - SC8000
Customer________________________________________________________
Address__________________________________________________________
Ciry_________________________ St________________ Zip______________
Ref Operational Inspection Items OK Defect Codes
(Circle)
Does
Not
Work
1
Check drive pedal sensor operation (to test depress drive pedal and start
the engine, it should not start.)
A B C
2
Engine starting with pedal in neutral (if it will not start check pedal
calibration programming)
A
3 Engine idle speed, LPG/1200 RPM and Diesel/1300 RPM A rough
4
Normal operational speed (run switch setting) 2200 RPM
A low
power
5
Turbo high-speed (hold 2200 RPM switch setting for 2 sec. to enter )
2400 RPM
A B
6
Drive pedal linkage (check for Fwd/Rev drive and any neutral creep)
7 Drive system performance (max Fwd 8 mph)
Noisy
sluggish
8 Brakes A B W
9 Steering excessive play
10
Right side scrub brush raise/lower (model option if equipped)
B D L
11
Right side scrub brush on/off (must have main scrub turned on)
B L
12
Side sweep broom(s) raise/lower (model option if equipped)
A B
13
Side broom(s) on/off
B L
14
Dust guard (sweep dust control) On/Off (model option if equipped)
A C L
15
Scrub system (Raise/Lower and auto scrubbing functions)
16
Main scrub brushes On/Off (will drift)
17 Scrub Brush (pressure settings 1, 2 and 3)
A B
18
Solution control (On/Off and flow volume min/max)
C D
19
Test and purge the detergent EcoFlex™ / AXP™ system (if so equipped)
C L W
20
Squeegee system (raise/lower and auto lift in reverse)
21
Vacuum Performance (Sealed water lift 34” @ 2200 RPM)
C L
22
Headlights, gauges and (optional) accessories rotating beacon, backup
alarm
23
Tilt steering mechanism and seat adjustment lever
Defect Codes
A Needs Adjustment
B Binding
C Contaminated or dirty
D Damaged, bent or torn
L Leaks
M Missing
W Worn out