Michco sc8000, Руководство по обслуживанию

Страница: 20 / 225

General Information 19 Service Manual – SC8000
Recommended Service Materials
• Engine Oil (refer to your engine manual)
• Hydraulic oil (10W-30)
• Manufacturer-recommended coolant (antifreeze) 50/50 mix
• Lithium-base grease
• Loctite
®
(or equivalent) thread sealant in the appropriate grades
• Never-Seez
®
(or equivalent) anti-seize compound
Daily Maintenance
Caution! Do not pressure-wash the operator control panel, electrical components or engine
compartment area.
Maintenance Item Procedure
Perform “After Use” maintenance steps
“After use” maintenance is normally the responsibility of the
machine Operator. Refer to the Instructions for Use.
Engine
Check the engine oil level.
Check the engine coolant level in the reservoir.
Check for engine and coolant leaks.
Check the air cleaner service indicator and service the air filter
when the indictor is shown red.
Operator control panel
Check for a hydraulic filter plugged icon on the operator panel
display.
Hydraulic system
Check the oil level in the hydraulic oil reservoir (level should be
to bottom of screen).
Check for any hydraulic leaks.
Recovery tank
Check that the drain hose cap is sealed.
Drain and clean the inside of the tank; flush with clean water.
Check the cover gasket for damage/wear.
Squeegee pick-up tool
Clean the squeegee tool; check the blades for damage/wear and
deflection.
Scrub housing side skirts
Check for damage/wear.
Scrub brushes, main and right side
Check for debris wrapped around the brushes/brooms and for
damage/wear.
Main and side brooms
Wet debris hopper
Clean the hopper, debris screen and hose.
Parking brake and foot pedal brake Check for correct operation of brakes; adjust as needed.