MHG Heating procon gwb smartline, Инструкция по установке и эксплуатации

Страница: 19 / 27

73
ProCon Smartline
[EN] - Multi-wire diagram (S - HS - H)
“L-N” polarisation is recommended
Bl=Blue / Br=Brown / Sw=Black / Rt=Red / Ws=White /
Vt=Violet / Gb=Yellow / Or=Orange / Gr=Gris / Verde=Gn /
Rs=Pink
GA=Gas valve /F=Fuse
Hz. - CH
DHW. - DHW
AD01X - Control board
SK - Condensate pump alarm- Low temperature thermostat
OT - Remote control
CN1÷CN5 - High-voltage connections
CN12 - Service connector
E.A. (1) - Ignition electrode
I.E. (2) - Flame detection electrode
F - Fuse 3.15A F (fast)
F1-F2 - Fuse 3.15A T (delayed)
DFS - Domestic hot water flow switch (S)
JP5 - Boiler configuration pre-selection jumper (pos. 5 for S)
JP2 - Boiler configuration pre-selection jumper (pos. 2 for HS)
JP3 - Boiler configuration water tank thermostat (H)
M3 Electric supply
M3-M5 Clock/ambient thermostat terminal strip
M3a - Condensate pump/low temperature thermostat
M2a - Water tank thermostat
M2-M4 - water tank probe terminal strip (HS)/External
probe/remote control
M4 - External probe/remote control
V1-V2 - Gas valve operator
P - Pump
W.D.S. - Water pressure switch
P1 - Domestic hot water temperature adjustment
potentiometer
P2 - Heating temperature adjustment potentiometer
P3 - Function selector
R9 - Maximum fan speed trimmer
R10 - Minimum fan speed trimmer
R14 - Slow start speed trimmer
R19 - Maximum heating fan speed trimmer
R35 - Heat adjustment curve selection trimmer
K.S. - Condensate sensor
ATF - External probe
K.V.F. - Primary circuit delivery temperature probe
K.R.F. - Primary circuit return temperature probe
S.W.F. - Domestic hot water circuit probe (NTC) (S)
SW1 - Flue cleaner
TSC2 - Ignition transformer
TR2 - Main transformer
A.T.B. - Limit thermostat over-temperature water
GS 230V - Fan power input 230V
GS - Fan control signal
X2÷X16 - Low voltage connections
3V - 3-way solenoid servomotor
RTM - Ambient thermostat
STM - Water tank thermostat
BWF - Water tank probe
A.F.- Fumes probe
ProCon Smartline H