MHG Heating HTP 150, Инструкция по установке и эксплуатации

Страница: 49 / 76

© MHG Heating Ltd
MHG Heating Ltd, Unit 4 Epsom Downs Metro Centre, Waterfield, Tadworth, Surrey, KT20 5LR
P:0845 6448802 F:0845 6448803 E: info@mhgheating.co.uk W: www.mhgheating.co.uk
010617
49
6819 Error code history entry 10
102:Clock time
master without
power reserve
6820 Reset error history No
Service/special operation
7040 Burner hours run maintenance interval ------- h
7041 Burner hours run since maintenance 0 h
7042 Burner starts maintenance interval -------
7043 Burner starts since maintenance 0
7044 Maintenance interval ------- Months
7045 Time since maintenance 0 Months
7053 Flue gas temp limit ------- °C
7054 Delay flue gas temp signal 0 min
7119 Eco function Locked
7120 Eco operation -------
7130 Chimney sweep function Off
7140 Manual operation Off
7150 Outside temp simulation ------- °C
7170 Telephone customer service
IO test
Used to check inputs and outputs
7700 Relay test No test
7730 Outside temperature B9 ------- °C
7732 Flow temperature B1 ------- °C
7750 DHW temperature B3 ------- °C
7760 Boiler temperature B2 ------- °C
7820 Sensor temperature BX1 23.1 °C
7821 Sensor temperature BX2 ------- °C
7830 Sensor temperature BX21 module 1 ------- °C
7831 Sensor temperature BX22 module 1 ------- °C
7832 Sensor temperature BX21 module 2 ------- °C
7833 Sensor temperature BX22 module 2 ------- °C
7840 Voltage signal H1 0 V
7841 Contact state H1 Open
7845 Voltage signal H2 0 V
7846 Contact state H2 Open
7870 Signal burner fault S3 0V
7881 Signal 1st burner stage E1 0V
Status
8000 Status heating circuit 1
Room frost
protection active
8001 Status heating circuit 2 ---
8002 Status heating circuit P ---
8003 Status DHW ---
8004 Status cooling circuit 1 ---
8005 Status boiler ---
8007 Status solar ---