MGI JETVARNISH 3DS, Руководство пользователя

Страница: 58 / 176

JETVARNISH 3DS 8. How to use the machine
User Manual - 58 -
To move up the feeder plate. press button [7].
To bring down the feeder plate. press button [8].
To activate the pump and the margin table. press button [5].
To reset a double sheet error. press button [6] after removing the picked up printing substrate (margin
table belt goes ON).
Before printing. it is mandatory to adjust height of paper pile to avoid jam or double sheets trouble. To
do it. setup the upper pile limit sensor. Refer to Chapter 8.1.3 Upper pile limit sensor.
8.1.3 Upper pile limit sensor
[9] Upper pile limit sensor adjusting handle
[10] Upper pile limit sensor
[11] Upper pile limit sensor switch
To setup upper pile sensor:
1. Put top of paper pile in contact with upper pile sensor switch [11] to activate sensor [10] (Refer to Chapter
chapter 8.1.2 to move feeder plate).
[10]
[9]
[9]
[11]
[10]