MGI JETVARNISH 3DS, Руководство пользователя

Страница: 15 / 176

JETVARNISH 3DS 2. Security and Safety Rules
Technical Manual - 15 -
Do not let the machine operate alone
When operating, the JETVARNISH 3DS uses heating elements - up to more
than 70°C - even though sensors are present to prevent all risks, it is
prohibited to leave the JETVARNISH 3DS in unattended operation.
Wearing protective gloves and
safety goggles
Varnish is an irritating product - see MSDS attached to each product - and
cleaning agent dry skin. It is mandatory to observe the usual precautions:

Wear appropriate protections such as gloves, goggles and gown before
handling.

Avoid skin contact. - Use synthetic material gloves

Change any contaminated clothing.

In case of skin contact, immediately wash with water and soap.

Never use UV cleaning agent to clean hands!

Should there be any risk of varnish or cleaning solution splashes into eyes,
wear protective goggles.

In case of contact with eyes, immediately wash with plenty of water, and
seek medical advice.

Use a hand barrier cream.

In case of varnish splashes, immediately clean.

Dispose of all cleaning materials in containers provided for this purpose.
Machine precautions
Hold the printing unit doors closed. The varnish was specially developed for
the JETVARNISH 3DS; it can harden through the action of UV LED;
nevertheless, varnish left in the open may polymerize under the effect of solar
radiation or neon tubes. Holding the printing system as far away as possible
from direct light guarantees longevity of the components in contact with
varnish.
Caution relating to products
Any product having started a polymerization phase cannot be used as severe
damage to the JETVARNISH 3DS may occur, thus jamming the print heads. It
is mandatory to dispose of any product having suspicious looks.
Dust and environment
The room where the JETVARNISH 3DS is located shall be as clean as
possible as any dust deposited on sheets before varnish drying is
"encapsulated"
Varnish and cleaning agent storage
Preserve inks and varnish in the original containers and cartons closed and
sealed, away from light. - See MSDS Step No. 7
Store in a cool and dry place.
Varnish shelf lives
MGI varnish has a shelf life of 1 year.
The storage place temperature shall be between 15°C and 35°C.