MGI JETVARNISH 3DS, Руководство пользователя

Страница: 16 / 176

JETVARNISH 3DS 2. Security and Safety Rules
User Manual - 16 -
3 MACHINE SPECIFICATIONS AND CONFIGURATIONS
3.1 Machine specifications
Printing technology
MGI’s exclusive inkjet engine technology
Drop-on-Demand (DoD) technology
Piezoelectric print heads
Single pass printing
Flexible & scalable printing architecture
Coating thicknesses
Depending on your file, the printed material, the CYMK printing technology
and/or finishing technology used, the coating thickness can vary from 21 µm up
to 121 µm for 3D raised effects and a tactile finish (and 42µm to 242µm when
the twin bar option is installed) -
new data as of June 2017
30-35 µm required on toner (such as Bizhub C1070/C1060, C1100/C1085 and
Meteor ) in order to have optimum printing quality
Production speeds Up to 2,298 A3 per hour at 21** µm
Up to 1,624 A3 per hour at 43** µm
Up to 513 A3 per hour at 116** µm
** new data as of June 2017
NOTA: Printing speeds are given to indicative information and may vary
according to printing substrate, number of drop set on the data file and under
full operator responsibility. See the above table showing the production speeds
per drop.
Registration Fully motorized and automatic left side lay guide
New feature of automated registration using MGI ARC System with optical
detection of printed crop marks. Overall registration of ± 200 µm
Formats
Min: 21.0x29.7 cm / 8 x 11.8” (in portrait mode i.e. long side first)
Max: 36.4x102.0 cm / 14.33x40.15”
Max. print width 35.3 cm or 353 mm - new data as of September 2016
Substrate thickness Min: 135 gsm and not less than 150 µm/6 mil before printing & lamination
Max: 450 gsm and not more than 450 µm/
18
mil before printing & lamination
Motorized height-adjustment print heads
Substrates
Printing on most matte or glossy laminated surfaces, with or without aqueous
coating, layered paper, plastic, PVC and other coated materials
Printing directly on most digital prints (i.e. Bizhub C1070/C1060, C1100/C1085
or Meteor ) with no lamination or coating required
UV coating container capacity 10 liters/2.6 US gal. tank capacity
High capacity automatic feeder
Feeder able to handle a paper pile up to 30 cm / 11.86” high
Approximately 2,500 sheets at 135 gsm
High pile output stacker Stacker able
to handle a paper pile up to 30 cm / 11.86” high
Approximately 2,500 sheets at 135 gsm
Paper path 100% flat paper path
Vacuum feed system
Air feed system
Automatic double sheet detection