24 – Control CS 320 FU / Rev.A 1.01
Control CS 320 FU / Rev.A 1.01 – 25
EN
5.16 CS radio
Connection
Plug the radio receiver into connector strip X9.
Teach transmitter codes
Press and hold the programming button (B) for longer than
1.6 seconds. The programming mode is activated.
The LED (C) flashes.
Press the channel button of your transmitter.
If the radio controller has stored the transmitter code, the
LED lights up for approx. 4 seconds.
A total of 15 transmitter codes (hand-held transmitter) can be
taught.
If all storage spaces are occupied, the LED flashes very rapidly.
Furthermore, it is possible to integrate additional hand-
held transmitters through duplication from one hand-held
transmitter to the next.
Targeted deletion of a transmitter code
Press and hold the programming button (B) for longer than
1.6 seconds. The programming mode is activated.
The LED (C) flashes.
Continue to press and hold the programming button. Erase
mode is activated. The LED flashes very quickly.
Press the desired channel button of your transmitter.
If the LED lights up for approx. 4 seconds, the corresponding
transmitter code has been deleted.
You can cancel the deletion process by briefly pressing the
programming button.
RESET (completely delete memory)
Press and hold the programming button (B) for longer than
1.6 seconds. Programming mode is activated.
The LED (C) flashes.
Continue to press and hold the programming button.
Erase mode is activated. The LED flashes very quickly.
Press and hold the programming button for longer than
1.6 seconds.
If the LED lights up for approx. 4 seconds, all storage spaces
have been deleted.
You can cancel the deletion process by briefly pressing the
programming button.
5.17
5.17 Digital 991
Digital 991
Connection
Plug the radio receiver into connector strip X9.
Teach transmitter codes
Press and hold the programming button (B) for longer than
1.6 seconds. The programming mode is activated.
The LED (C) flashes.
Press the teach button and then the channel button of your
transmitter.
If the radio controller has stored the transmitter code, the
LED lights up for approx. 2 seconds.
A total of max. 200 transmitter codes (hand-held transmitter)
can be taught. If all storage spaces are occupied, the LED
flashes very rapidly.
Targeted deletion of a transmitter code.
Press and hold the programming button (B) for longer than
1.6 seconds. The programming mode is activated.
The LED (C) flashes.
Continue to press and hold the programming button. Erase
mode is activated. The LED flashes very quickly.
Press the desired channel button of your transmitter.
If the LED lights up for approx. 2 seconds, the corresponding
transmitter code has been deleted.
You can cancel the deletion process by briefly pressing the
programming button.
RESET (completely delete memory)
Press and hold the programming button (B) for longer than
1.6 seconds. The programming mode is activated.
The LED (C) flashes.
Continue to press and hold the programming button. Erase
mode is activated. The LED flashes very quickly.
Press and hold the programming button again for longer
than 1.6 seconds. If the LED lights up for approx. 2 seconds,
all storage spaces have been deleted.
You can cancel the deletion process by briefly pressing the
programming button.
Содержание CS 320 FU
Страница 1: ...EN Control CS 320 FU Rev A 1 01 1 Operating Instructions Control CS 320 FU ...
Страница 74: ...74 Control CS 320 FU Rev A 1 01 ...
Страница 75: ...EN Control CS 320 FU Rev A 1 01 75 ...
Страница 76: ... 185580 ...
