Meyra 1.736 Скачать руководство пользователя

Страница: 54 / 76

Chassis

The chassis and wheels can be cleaned
damp with a mild detergent. After-
wards dry off well.

☞

Note:

Check the chassis for corrosion

damages as well as other damag-
es.

Occasional application of a light cov-
er of oil to all moving parts (see also
Maintenance Instructions) will ensure
that your wheelchair will give you
many years of service.

Disinfection

If the product is used by more than
one person (for example in a care cen-
tre), the use of a commercial disinfect-
ant is mandatory.

For hand disinfection of the product
we recommend Incidin plus in 0.25 to
0.5% concentrations or an equivalent
disinfectant.

☞

In doing so the manufacturers in-

structions are to be observed.

☞

Note:

Before disinfection the upholstery
and handles are to be cleaned.

Reinstallment

Before reimplementation the wheel-
chair is to undergo a complete inspec-
tion.

☞

Note:

The hygienic measures required

for reimplementation are to be
carried out in correspondence with
the validated hygienic plan.

MAINTENANCE

The following maintenance Instruc-
tion gives you a guide for carrying out
the maintenance work.

☞

They do not give information
about the actual extent of work
required on the vehicle.

Содержание 1.736













































































Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды

Meyra 1.736, Руководство по эксплуатации

Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды