Meyra 1.736 Скачать руководство пользователя страница 33

Страница: 33 / 76

Adjustable back

The adjustable back is adjustable
through a velcro strap, the so called
spanning straps (1).
The cushion (2) is placed over it and
attached with the velcro strap.

Adjusting the adjustable back

☞

Note:

☞

The fi tting of the adjustable back

(1) is best carried out with the user
sitting in the wheelchair and the
seat angle is set at 0°.

☞

Adjustment is carried out from the

bottom to the top.

☞

The lower part of the adjustable

back should remain slightly loose
so that it adapts to the buttocks
when bending forward.

Attention:

The overlapping of the Velcro fas-
tener has to be at least 10 cm!

1. Pull off the rear part of the cush-

ion.

2. Span the spanning straps tightly

over the small of the back and
lumbar spine in order to give maxi-
mum support.

3. Adjust the remaining straps to the

form of the back.

4. Afterwards loosen the front part

of the cushion and align it with the
spanning straps.

☞

In doing so the user should lean

forward. If necessary ask an aid to
help out!

Содержание 1.736













































































Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды

Meyra 1.736, Руководство по эксплуатации

Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды