Meyra 1.736, Руководство по эксплуатации

Страница: 35 / 76

1
2
35
PUSH HANDLES
Height adjustable push han-
dles
The height adjustable push handles
(1) are attached to the back support
with a clamping jig each (2) and can
be adjusted to the requirements of
the attendant.
The push handles are continuously
height adjustable, swivelling in steps
of 30° and secured against being
pulled out.
☞
Note:
Further varieties of push handles
are optionally available at you spe-
cialist dealer.
Height adjustment
– Loosen the clamping screw with
the clamping levers (2) so far that
the respective push handle can be
adjusted into the desired position.
– Lift the push handle to the desired
height.
– Retighten the clamping screw with
the clamping levers (2).
Special features of the clamping
lever
The clamping lever (2) can be turned
into an operation position that is com-
fortable for you.
– For this pull the lever outward, un-
til the teething is released.
– After turning the lever let the
teething engage again.