Meyra 1.736, Руководство по эксплуатации

Страница: 23 / 76

1
23
Attaching the leg supports
With the leg support in a swivelled-
aside position, hang it in and then
swivel it to the front until the locking
device audibly latches.
☞
Note:
After swivelling the leg support in-
ward again do not forget to check
the corresponding locking device.
– Afterwards swivel the calf cushion
inward again.
Height adjustment of the leg sup-
port
When seated in the wheelchair, ask a
carer to raise the leg support to the
desired level. The length adjustment
is given through the turning point at
the height of the knee joint.
!
Attention:
Never put the free hand into the
adjustment mechanism while ad-
justing the height adjustable leg
support. – Danger of crushing!
•
Operate parking brakes. – This
prevents accidental rolling of the
wheelchair (see section <
Brakes
>).
•
Do not let the leg support drop
on its own weight. – Danger of
squashing!
1. First secure the leg support with
one hand against folding down,
and then loosen the clamping le-
ver (1).
2. Have the leg support lifted to the
desired level by an attendant and
retighten the clamping lever (1).
To lower the leg support, remove the
load momentarily from the support
by raising the lower thigh (ask an at-
tendant if necessary), and loosen the
clamping lever (1).
The leg support can now be moved
slowly downwards.
After the adjustment retighten the
clamping lever (1).