Meyra 1.736 Скачать руководство пользователя

Страница: 53 / 76

SERVICE

Cleaning and maintenance

☞

Note:

☞

Do not clean the wheelchair with a

high-pressure cleaner!

☞

For care you should use silicon free

cleansing or care agents on a warm
water basis such as the leather care
emulsion from Sonax. – In doing so
the manufacturers instructions are
to be observed.

☞

Do not use aggressive cleaning

agents e.g. solvents, or hard brush-
es etc.

Upholstery and covers

Clean the upholstery and covers with
warm water and hand wash lotion.
Spots can be removed with a sponge
or a soft brush.

☞

Note:

Wash off persistent dirt with com-
mercial fi ne detergent.

☞

Do not soak! Do not machine

wash!

Follow-up with clean water and allow
to dry.

Plastic parts

The arm supports and parts are made
of high-quality plastic.

☞

Only clean the plastic parts with

warm water and neutral detergent
or soft soap.

Attention:

The arm supports are made of pol-
ystyrene and are affected by non-
ionic tensides as well as through
solvents and especially alcohol.

☞

When using commercial plastic
cleansers the manufacturers ap-
plication instructions are to be ob-
served.

Finish

The high quality fi nish ensures an
optimum of protection against corro-
sion.

☞

For paint and chrome care the

commercially available brand
name paint and chrome cleansers
are recommendable.

☞

Should the coating be damaged

with scratches or similar, these ar-
eas can be touched up with our
paint pen available at the special-
ist dealer.

Содержание 1.736













































































Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды

Meyra 1.736, Руководство по эксплуатации

Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды