Meyra 1.736 Скачать руководство пользователя

Страница: 26 / 76

Inserting the arm support

To attach the arm support insert the

bolt currently in the slanted posi-
tion (1) into the respective recep-
tacle (2).

☞

When swivelling down the arm

support, take care that the bracket
(3) grips around the back tube.

– Swivel the arm support forward

into the corresponding receptacle
until the locking button (4) audibly
engages.

☞

Note:

The swivelling forward automati-

cally engages the rear locking de-
vice of the arm support.

Height adjustment of the arm
supports

– For height adjustment of the arm

support secure the support pad
with one hand to prevent it from
falling down.

– Then activate the release button

from the inside (5) with the other
hand.

– Now slide the arm support into the

desired position, release the spring
button (5) and let it snap into place
by sliding the arm support into the
next possible position (6).

Содержание 1.736













































































Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды

Meyra 1.736, Руководство по эксплуатации

Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды