Meyra 1.736 Скачать руководство пользователя

Страница: 41 / 76

Stick-in support wheels

Removing/attaching the support
castor

To remove / insert the support castors
press down the respective spring but-
ton (1).

When replacing the support castors
slide them in until the spring button
(1) automatically snaps into place.

☞

Note:

The spring button must engage vis-
ibly and audibly. – Check the func-
tion!

Adjusting the support castor

Press the spring button to adjust the
support castor (2), the reposition the
support castor accordingly until the
spring button automatically locks into
the next position.

☞

Note:

The spring button must engage vis-
ibly and audibly. – Check the func-
tion!

Correct support castors length

The support castors must reach further
out than the drive wheels in order to
achieve a suffi cient support function.

Attention:

For

suffi cient tilting stability both

support castors are to be posi-
tioned evenly.

•

Have the function checked by the

specialist dealer after each change
to the seat height and wheel size!

☞

Note:

Therefore observe the safety in-

structions <

Mechanical wheel-

chairs

> chapter <

Inclinations,

overcoming obstacles

as well as

Driving on elevators, lifts and esca-
lators

Содержание 1.736













































































Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды

Meyra 1.736, Руководство по эксплуатации

Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды