Meyra 1.736 Скачать руководство пользователя

Страница: 59 / 76

Adjusting the brakes

According to the <

Maintenance in-

structions

> the brakes are to be

checked for function after each repo-
sitioning of the drive wheels and re-
adjusted if necessary.

– Loosen the clamping screws (1) of

one pressure brake.

– Afterwards Preadjust the respec-

tive brake by repositioning it ac-
cordingly.

Pressure brake:

– For this slide the brake bolt of the
inactivated brake (2) to approx. 5
mm - 10 mm in front of the drive
wheel and align it at a right angle
to the drive wheel.

– Retighten the clamping screws (1).

Adjust opposite pressure brakes as de-
scribed.

Equally adjust both pressure brakes,
taking into account

– tread of the drive wheels,

– air pressure of the tyres and

– user

weight.

adjust evenly. – Danger of accidents
caused by one sided braking effect!

Fine adjustment of the pressure
brakes

– Slacken the clamping screws (1).

– Fine tuning is achieved by slight re-

positioning of the respective pres-
sure brake.

– Retighten the clamping screws (1).

☞

Note:

Inspect function and accurate fi t of
the pressure brakes (2).

Содержание 1.736













































































Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды

Meyra 1.736, Руководство по эксплуатации

Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды