Meyra 1.736 Скачать руководство пользователя

Страница: 44 / 76

THERAPY TABLE

Attention:

Place, adjust and reposition or re-
move the therapy table only after
activating the brakes.

•

Sharp objects (e.g. watches, rings,

knives or belt buckles) as well as
coarse dust can cause unattractive
brush marks in the surface of the
therapy table.

•

Do not use aggressive or granular

cleaning agents to clean the thera-
py table!

•

Do not place any hot objects onto

the therapy table!

•

Do not drive with the therapy ta-

ble attached when there are loose
objects or containers with fl uids on
it!

•

Do not use the therapy table as

handle for carrying the wheel-
chair!

Mount the therapy table

The therapy table is pushed from the
front over the arm support cushions
(1).

Attention:

For a safe stability of the inserted
therapy table only arm supports
with long arm support cushions
should be applied (1).

Содержание 1.736













































































Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды

Meyra 1.736, Руководство по эксплуатации

Результаты поиска

Содержание 1.736

Отзывы:

Похожие инструкции для 1.736

Бренды по названию

Популярные бренды