Metal Fusion King Kooker OUTDOOR COOKER, Инструкция по сборке и эксплуатации

Страница: 9 / 40

TOOLS REQUIRED:
TORQUE WRENCH or ADJUSTABLE WRENCH, LEAK TESTING SOLUTION
1. Before assembling, check that all cooker components are included in the shipping carton. Identify
these cooker parts from the assembly drawing. Accessories such as pots may vary according to
model. Check the list of accessories on your cooker box. The following parts are considered
essential and should be included in your package regardless of model number.
Required Parts Lists:
Cooker Stand, Cast Burner(s), Hose and Regulator, Thermometer(s)
If any of the above parts are missing, contact Metal Fusion, Inc. at 1-800-783-3885 between the
hours of 7:30 a.m. and 3:30 p.m. CST Monday through Friday for replacements.
2. Read assembly instructions, and understand sequence of assembly, before commencing to
assemble your cooker.
3. NOTE: The hose to burner connection will be one of the following:
Figure 1) Hose with male fitting and adjustable regulator.
Figure 2) Hose with female fitting and adjustable regulator.
Figure 3) Hose with male or female fitting and needle valve with non-adjustable pressure
regulator.
Figure 4) Double hose with male fittings and needle valves with non-adjustable pressure regulator.
9
SECTION I
OUTDOOR COOKER ASSEMBLY
THE USE AND CARE MANUAL MUST BE READ AND UNDERSTOOD
BEFORE USING THE APPLIANCE
(Throughout this manual the words appliance, cooker, fryer/boiler, burner and stove will be
used interchangeably to refer to the King Kooker ® Outdoor Cooker.)
COOKING POT
VENTURI TUBE
1/8 MALE PIPE THREAD
BURNER
ADJUSTABLE REGULATOR
TYPE 1
CONNECTION
N O
AIR SHUTTER
Figure 1
HOSE WITH MALE FITTING AND ADJUSTABLE REGULATOR.
•
WARNING
Tighten the hose fitting into the venturi with a torque wrench, up to a torque of 95 to 105 lb./in.
Alternatively, hand tighten securely and then, using a wrench, tighten an additional 1-1 1/2 turns.
20 lb. LP
Gas Cylinder
36825GAkk 3/29/06 9:49 AM Page 9