Metal Fusion King Kooker OUTDOOR COOKER, Инструкция по сборке и эксплуатации

Страница: 12 / 40

12
CS8T ASSEMBLY INSTRUCTIONS
REQUIRED TOOLS:
ADJUSTABLE WRENCH
1. This cooker has four legs with crossbars and two stablizer bars.
2. Flip the legs into the standing position.
3. Hook each stabilizer bar over the crossbar on the leg
opposite it. The hook on the end of the bar must be pressed
down around the crossbar so that the leg is locked into
position. Always recheck that both hooks are in place before
lighting the cooker or placing cooking equipment on top of
the cooker.
4. Attach a foot extension to each of the four legs. Place the
hole on one of the foot extensions on the outside of the hole
at the bottom of a leg.
5. Place a bolt through the holes on the leg and foot extension
and secure with a nut from the bolt package.
6. Follow the same procedure to attach a foot extension to
each of the remaining three legs.
7. Refer to Figure 4, pg. 11 for hose assembly instructions.
8. Go to the Use and Care Section of this manual for further
instructions.
Foot Extensions
2500 FRY BASKET ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: Screwdriver
Parts List:
Fry Basket with Mounting Plates (1)
Long Handle (1)
Short Handle (1)
Bolts and Washers (8)
Assembly:
1) Locate side of basket with attached clip for attaching basket to side of pot. Locate the
“long” handle. Align the four holes on the handle to four holes on the mounting plate of
basket. Attach using four bolts/washers.
2) Locate “short” handle . On opposite side of basket from “long” handle, attach “short”
handle to basket using same method as above.
3) Go to the Use and Care section of this manual for further instructions.
FAILURE TO INSTALL FOOT EXTENSIONS OR LOCK STABILIZER BARS ONTO
CROSSBARS CAN INCREASE THE RISK OF THE UNIT TIPPING. FOOT EXTENSIONS
AND STABILIZER BARS MUST BE ATTACHED SECURELY AS PER THE ABOVE
INSTRUCTIONS BEFORE OPERATING THE COOKER!
WARNING
36825GAkk 3/30/06 2:33 PM Page 12